FP/BFP Range of Explosion Proof/Flameproof Certified Immersion Heaters

Register Interest: (Enter Valid Email Address and hit Return)

Description: The ‘FP/BFP’ type flameproof electric heaters comprise a large range of process immersion heater, certified for use in a Zone 1 or Class 1, Div 1 hazardous area, custom built to meet client specifications.
FP/BFP Range of Explosion Proof/Flameproof Certified Immersion Heaters

PDF Printable Documents

Download Datasheet

Features

  • Up to 1000kW (Larger ratings achieved by a combination of enclosures)
  • ATEX approved Ex II G or G and D.
  • Certified Ex/AEx d, Zone 1, Gas Groups IIB or IIC.
  • Certified Class I, Div 1, Gas Group A, B, C, & D.
  • CENELEC, IECEx, CSA.
  • Terminal box is certified weatherproof to IP66/67 or NEMA 7.
  • Temperature Classifications T1-T6.
  • Elements are specially sealed to prevent moisture ingress.
  • Elements are individually replaceable on site without the need for special tools.
  • Withdrawable type elements available to facilitate replacement without draining the vessel.
  • Suitable and certified for use in high and low ambient temperatures e.g. Middle East and Arctic regions.
  • Anti-condensation heaters fitted if required.
  • Elements are manufactured from 80/20 NiCr resistance wire with high purity compacted Magnesium Oxide powder sheathed within corrosion/erosion resistant tube, e.g.

    - Incoloy 800/825
    - Inconel 600/625
    - Titanium
    - Stainless Steel 316/316L
    - Stainless Steel 321
    - Monel

Typical Application

  • Crude Oil / Hydrocarbon Liquids
  • Glycol (TEG & MEG) Reboilers.
  • Molecular Sieve Regeneration.
  • Heat Transfer Oils.
  • Heating Medium.
  • Industrial Gases.
  • Tank Heating / KO Drums.
  • Natural Gas.
  • Fuel Gas / Fuel Oils.
  • Water.

Contact sales(at)exheat.com for Ordering/Purchase and Quotations.