‘FP-CA’ Removable Cartridge Immersion Heater

The range of FP-CA Flameproof removable cartridge heaters offers a Hazardous Area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element or multi cartridges fitted into a mounting flange. A robust Ex‘ d’ terminal enclosure protects the electrical connections. The watts density of the element fitted depends upon the media to be heated and the kilowatt rating required.
Register Interest:
‘FP-CA’ Removable Cartridge Immersion Heater

Features

Certified to meet the requirements of the ATEX Directive 94/9/EC and IECEx

Mild steel or 316 stainless steel terminal enclosure with weatherproof protection to IP66

Choice of built in process temperature sensors

Suitable for ambient temperatures from -50°C to +60°C

Mounting of the heater can be by a threaded boss or an industry standard flange

Designed for horizontal installation (vertical mounting version available on request)

Can be supplied with the terminal box mounted away from the fixing boss/flange for high process temperatures

Typical Applications

Pre-heating oil/water

Processing equipment

Cleaning and rinsing tanks

Heat transfer systems

Boiler equipment

Frost protection

Compressors

Turbines

Specification

Certification
ATEX certified II 2 G/D
IECEx & ATEX certified Ex’d’ IIC T1 to T6 Ex tD A21 IP66 T450 to 85°C
CSA certified Class I, Div 1, Gas Groups A, B, C & D
EN/IEC 60079-0, EN/IEC 60079-1, EN/IEC 61241-0 & EN/IEC 61241-1
CCOE (India) & KGS (Korea)
Enclosure
Mild steel or 316 stainless steel, external and internal earths, screwed terminal cover, finished in epoxy paint (if required)
Elements
Removable 304 stainless steel cartridge, comprising high quality 80/20 Nickel Chrome resistance wire, housed within 316L Stainless Steel sheath. Cartridges secured by either brazing or welding depending upon the process application
Controls
Heater over-temperature protection is fitted as standard (optional process temperature sensing devices can be incorporated in the form of thermostats, RTD’s or thermocouples)
Mounting
Any threaded boss or flange in any material can be specified within the limits of the design parameters
Heater terminal box can be either ‘direct-on’ or ‘stand-off’, depending on process temperature
Rating
To suit process requirement within the design parameters and ATEX approval
Voltage
Any electrical supply up to 480V

Get a Quote online now

Contact Sales Engineer


Standard Products Sales Lines:
+44 (0)1953 886 210 - UK
+65 6496 4629 - ASIA

Account





Register an Account | Password Recovery